10
ASSEMBLING AND PREPARING
Setting up the TV
Attaching the Stand
1
Check the orientation (front and rear) of the stand
base and mount the Stand Body to the Stand
Hinge as shown in the figure.
Stand Hinge
Stand Body
CAUTION
When attaching the stand to the TV set,
y
place the screen facing down on a cush-
ioned table or flat surface to protect the
screen from scratches.
2
Turn the screw to the right into the back of the
stand body and close the Stand Screw Cover.
Stand Screw
Cover
NOTE
If you don`t fasten the screw tightly, TV will
y
fall down and get damaged.
Tighten the screws firmly to prevent the TV
y
from tilting forward. Do not over tighten.