LG 29UT55D Owner's Manual page 36

36
CUSTOMIZING SETTINGS
Gamma
Colour Gamut
Edge Enhancer
Expert Pattern
Colour Filter
Colour Temperature
Colour Management
System
To set additional picture options
SETTINGS> PICTURE> Picture Mode> Picture Option
[This feature is available on certain models only]
Adjusts detailed setting for images. Depending on input signal or other picture settings, the range of
detailed items for adjustment may differ.
Noise Reduction
MPEG Noise Reduction Eliminates noise generated while creating digital picture signals.
Black Level
Real Cinema
Motion Eye Care
To reset picture settings
SETTINGS> PICTURE> Picture Reset/ Reset
Resets picture settings that the user customizes.
Each picture mode is reset. Select the picture mode you wish to reset.
To adjust Aspect Ratio
Selects the screen aspect ratio.
SETTINGS> PICTURE> Aspect Ratio
16:9
21:9
Just Scan
Original
Full Wide
Sets the gradation curve according to the output of picture signal in relation to
the input signal.
Selects the range of colours that can be expressed.
Shows clearer and distinctive yet natural edges of the video.
[This feature is available on certain models only] Patterns used for expert
adjustment
Filters a specific colour spectrum in RGB colours to fine-tune colour saturation
and hue accurately.
Adjusts the overall tone of the screen as desired. In Expert mode, detailed
fine-tuning can be set via Gamma method, etc.
This is a system that experts use when they adjust colour with a test pattern.
They can select from six colour areas (Red / Green / Blue / Cyan / Magenta /
Yellow) without affecting other colours. For normal images, adjustments may
not result in noticeable colour changes.
Eliminates noise in the picture.
Adjusts the brightness and contrast of the screen to suit the black level of the
input picture by using the blackness (black level) of the screen.
Optimizes the screen for movie viewing.
[This feature is available on certain models only.]
Saves power consumption by adjusting the brightness corresponding to the
movement of the image on the screen.
Resizes images to fit the screen width.
Resizes the image ratio to fit 21:9 screen.
Displays video images in the original size without removing parts of the edge
of the image. In DTV, Component, HDMI, and DVI (over 720p) mode, Just
Scan is available.
When your TV receives a wide screen signal it will automatically change to the
picture format broadcasted.
When TV receives the wide screen signal, it will let you adjust the picture
horizontally or vertically, in a linear proportion,to fill the entire screen fully. 4:3
and 14:9 video is supported in full screen without any video distortion through
DTV input.
[This function is only available in Taiwan, Asia, Africa, and Israel.]
In DTV mode, Full Wide is available.
[This function is only available in the EU, China, and Hong Kong.]
In Analogue/DTV/AV/Scart mode, Full Wide is available.