Pairing A Phone - Acura NSX Owner's Manual

® ®
BLUETOOTH HANDSFREELINK (HFL)
Pick-up Press to go to the Speed Dial/Call History on the driver
button: information interface, or to answer an incoming call.
Hang-up/ Press to end a call, go back to the previous command, cancel a
back button: command, or clear the phone information on the driver
information interface.
Talk button: Press to access Voice Portal.
Left selector Move to the right or left to select the Speed Dial or Call History
wheel: on the driver information interface. Roll up or down to select an
item displayed on the Speed Dial/Call History display. Push to
call a number listed in the selected item on the Speed Dial/Call
History display.
86 |
n Talk Button Tips
When using the Talk button, wait for the beep before saying a command. The
system recognizes .
When using the Talk button, wait for the beep before saying a command. The
system recognizes only the commands in the Voice Command Index (see page
143).
• To bypass the system prompts, simply press the Talk button again to say your
command.
• Speak in a clear, natural voice.
• Reduce all background noise.
• Adjust the dashboard and side vents away from the microphone in the ceiling.
Fan speed may be temporarily reduced during voice recognition operation.
• Close the windows and moonroof.

Pairing a Phone

To use hands-free phone and streaming audio functions, you must first pair your
phone to the system. This can only be done when the vehicle is stopped. If there is
an active connection to Apple CarPlay
Android Auto), pairing of additional Bluetooth-compatible devices is unavailable
and Add Bluetooth Device is grayed out from the Bluetooth Device List screen.
®
BLUETOOTH HANDSFREELINK
™
(see Apple CarPlay) or Android Auto
®
(HFL)
™
(see
| 87