Bluetooth Handsfreelink; Color Information Display; Basic Hfl Operation; Pairing A Phone - Acura RDX 2018 Owner's Manual

BLUETOOTH® HANDSFREELINK®
BLUETOOTH HANDSFREELINK
®
Learn how to operate the vehicle's hands-free calling system.

Color Information Display

Basic HFL Operation

Make and receive phone calls using the vehicle's audio system, without handling
your phone.
Visit www.acura.com/handsfreelink (U.S.) to check phone compatibility.
HFL Displays and Controls
Use the controls to enter information and make selections.
To reduce the potential for driver distraction, certain manual functions may
be inoperable or grayed out while the vehicle is moving.
PHONE button: Go to
the phone screen.
BACK button: Go back
to the previous display
or cancel an operation.
Pick-Up button: Go to the Phone screen, or answer an
incoming call.
Hang-Up button: End a call.
Talk button: Call a number with a stored voice tag.
Back button: Go back to the previous screen.
Applicable laws may prohibit the operation of handheld electronic devices while operating a vehicle.
68 |
®
Selector knob: Rotate
and press to make and
enter selections.
HFL display
Models without navigation

Pairing a Phone

To use hands-free phone and streaming audio functions, you must first pair your
phone to the system. This can only be done when the vehicle is stopped. Use the
selector knob to make and enter selections.
Pairing the First Phone
1. Press the PHONE button. A prompt appears.
Select Yes.
2. Make sure your phone is in discovery mode.
Select OK.
3. HFL searches for your phone. Select your phone
when it appears on the list.
If your phone does not appear:
Select Phone Not Found?, and search for
HandsFreeLink from your phone. Connect when
prompted.
4. HFL gives you a four-digit code. Enter it on your
phone when prompted. The phone is now paired.
Pairing an Additional Phone
1. Press the PHONE button to go to the Phone
screen. If a prompt appears asking to connect to
a phone, select No.
2. Select Phone Setup.
3. Select Connection.
4. Select Add a New Phone.
5. Select an empty location for the phone.
6. Make sure your phone is in discovery mode.
Select OK.
7. HFL searches for your phone. Select your phone
when it appears on the list.
If your phone does not appear:
Select Phone Not Found?, and search for
HandsFreeLink from your phone. Connect when
prompted.
8. HFL gives you a four-digit code. Enter it on your
phone when prompted. The phone is now paired.
BLUETOOTH® HANDSFREELINK®
| 69