Acura NSX Owner's Manual page 10

SAFETY INFORMATION
A belt that has been worn during a crash may not provide the same level of
protection in a subsequent crash. Have your seat belts inspected by a dealer after
any collision.
Not checking or maintaining seat belts can result in serious injury or death if
the seat belts do not work properly when needed.
Check your seat belts regularly and have any problem corrected as soon as
possible.
n Fastening a Seat Belt
Adjust your seat to the proper position and then follow the steps below:
1. Pull the seat belt out slowly.
8 |
2. Insert the latch plate into the buckle,
then tug on the belt to make sure the
buckle is secure. Make sure that the belt
is not twisted or caught on anything.
3. Position the lap part of the belt as low as
possible across your hips, then pull up on
the shoulder part of the belt so the lap
part fits snugly. This lets your strong
pelvic bones take the force of a crash and
reduces the chance of internal inquiries.
4. If necessary, pull up on the belt again to
remove any slack, then make sure that
the belt rests across the center of your
chest and over your shoulder. This
spreads the forces of a crash over the
strongest bones in your upper body.
To release the belt, push the red PRESS
button then guide the belt by hand until it
has retracted completely.
Improperly positioning the seat belt can cause serious injury or death in a crash.
Make sure all seat belts are properly positioned before driving.
SAFETY INFORMATION
| 9