Advertisement
English
Mounting the Printer on the Wall
CAUTION:
When mounting the printer, make sure that the wall-mount is securely fastened to the wall.
When the brackets are attached properly for the TM-U220B/U220D, the printer's control panel will be on
the top and the connector side on the bottom. For the TM-T88IV/TM-T88V/TM-T88VI, TM-T90, and TM-
L90, the power switch will be on the top and the connector side on the bottom. For the TM-U230, the
connector side will be on the bottom. If this is not the case, please see "Installing the Brackets" section and
reattach the brackets in the proper position.
Slide the brackets into the slots of the wall-mount, starting with the top bracket.
12 WH-10 Installation Manual
Advertisement
