G) Cleaning Of The Card Transport Roller - Canon PR-C151 Operation Manual

6 - g) Cleaning of the card transport roller
It is able to clean the card transportation roller automatically, by using a specific cleaning card, and carrying out a cleaning mode.
But clean the input roller separately.
Prepare a specific cleaning card, and turn the printer power on.
→ Please tear off protection sheet of the card back side.
The cleaning mode is set in the user mode of the printer.
According to the following procedures, please carry out the cleaning of the card transportation roller.
Button operation / Work contents
1 MENU key press and hold
2 EXE key
3 MENU key
Indication changes by pressing the MENU key.
Press it till the indication changes as shown on right..
4 EXE key
Remove a blank card for print from the card hopper.
5 EXE key
Put the cleaning card on card hopper with printed side up.
Note 1：It may cause trouble when the card set with printed side down
Note 2：Push the card into a printer till at the point the card stops.
The chart below shows rough distance of pushing the card.
6 EXE key
Carry out cleaning automatically.
A card is come out from a normal exit, when the cleaning has completed
The indication changes as shown on right
7 MENU key
8 EXE key
9 Put the cards for print and push the CLEAR key.
- 42 -
Liquid crystal display
User Mode
CLR:Back EXE:Go
User Mode
PUSH MENU KEY
Printer Cleaning
Remove Normal Card
Set Cleaning Card
Please Wait..
Now Cleaning
↓
Set Cleaning Card
Return to Normal Mode
Card Empty
Ready to Print