Canon PR-C151 Operation Manual page 41

Section 6: Cleaning
Clean the rollers and print head regularly to ensure a comfortable working environment.
Read the cautions in this manual carefully before the cleaning operation.
Caution
□ Turn OFF the main switch and pull out the plug of power cord before the cleaning operation.
→ Otherwise, an electrical shock or personal injury could result.
□ Do not use solvents other than alcohol for cleaning OA equipments.
→ Using the solvent other than alcohol may damage the parts and may cause trouble of the printer.
□ Do not clean the parts at near the fire.
→ Alcohol is flammable and may cause fire accident.
□ Take off all the cards on feeder block before cleaning
→ In case of the roller in the feeder block rotate linking with other rollers. It may cause a trouble.
□ After the cleaning operation, leave the machine for about 5 min before restarting.
→ Correct printing may not be obtained if printed before the alcohol is completely dried.
□ Do not touch the rollers with hand.
→ Fingerprint may affect the quality of the printed image.
Although the interval of cleaning varies depending on the condition of the card,
the following period is recommended assuming that the cards are properly stored and handled.
Parts to be
cleaned
Input Roller
Ribbon Transportation
roller
Exit Roller
Print Roller
Transportation
Roller on F/T Block
Supply Roller
Print Head
Number of the frames printed is indicated by the counter on the operation panel.
→ Refer to Section 4 "Operation of User Mode".
Number of
frames printed
Every 2000
frames
Every 10000
frames
Every 10000
frames
Every 10000
frames
Every 10000
frames
Every 10000
frames
Every 2000
frames
- 36 -
Cleaning tools and solvent
Soft cloth with no fur, Alcohol
Soft cloth with no fur, Alcohol
Cotton swab, Alcohol
Cleaning brush, Alcohol
Cotton swab, Alcohol
Soft cloth with no fur, Alcohol
Soft cloth with no fur, Alcohol