C) Operation Of User Mode; Switching To User Mode; Basic Operation In The User Mode - Canon PR-C151 Operation Manual

4 - c) Operation of User Mode
User Mode is used to set the printer setting for the user environment or to check the printer status.

Switching to User Mode

1.Press and hold the MENU key on the Operation
Panel as illustrated.
The message on the LCD display changes from
"Input Command" to "User Mode".
2.Release the key after checking that the "User Mode"
is shown. Then, selection of
"CLR:BACK EXE:GO" appears on the lower line.
3.Select "GO" with the EXE key.
Then, "User Mode/Push Menu Key" is displayed
on the screen. If "BACK" is selected with
Clear key, it returns to Normal Mode.
4.After checking that the "User Mode/Push MENU Key"
is shown, press MENU key as directed, to move to the User Menu.
Then, the first menu, "Card Count" is displayed.

Basic Operation in the User Mode

As the User Menu has the following layer structure, select the desired item with the MENU
and change the setting values using EXE key or Clear key.
By pressing EXE key at
There are "Return to Normal Menu" or "Return to Parent Menu" selections at each layers. By pressing EXE
key at either of these selections, you can return to onelayer higher or to the Normal Menu.
Ready to Print
User Mode
Push MENU key
Card Count
EXE:sub menu
EXE
Return to
Normal Mode
".../EXE:sub Menu", it goes one layer below.
○○○○○○
EXE
MENU
MENU
EXE
EXE
Ready to Print
By keeping the MENU key pressed, the group
of menu circulates in the same layer.
Push MENU key
MENU
EXE:sub menu
MENU
EXE
Return to
Normal Mode
Return to
Parent MENU
- 25 -
EXE
Push MENU key
MENU
Return to
Normal Mode
Return to
Parent MENU
EXE
key