Sony Ericsson P800 User Manual page 44

Preliminary
Special characters
• Press and hold to insert a pause (represented by the
character in a DTMF (Dual Tone Multi Frequency)
p)
sequence.
• Press and hold to insert the international call prefix
Change phone volume
During a call you can use the Jog Dial to change the phone
volume.
Warning! The volume may be uncomfortably loud at the
higher volume levels if the phone is close to your ear. Exposure
to excessive volume levels may damage hearing.
• During an active call, pressing and holding
microphone. Pressing
• When entering text in flip closed mode, pressing
the last entered letter. Pressing and holding
text in the active field.
• When in stand by mode, pressing and holding
phone in silent mode.
Banking services
You can use your telephone banking services or other tone based
services.
44
.
+
mutes the
reactivates the microphone.
erases
deletes all
puts the
The P800 provides different ways of sending tones during a call:
• Pressing keypad keys during an active call, like on most
landline phones.
• Including tone digits already in the call set up. After the
phone number, but before the digits, press and hold
insert a Then insert your digits. Finally send away the call
p.
by pressing .
• Program digit sequences into your Contact card for the bank.
Each digit sequence to be sent as tones must begin with a
Once your call to the bank has been established and you want to
send your pre-programmed digit sequences, choose
on the menu to get to the Contact card with the tone sequences.
Warning! Never program any personal codes into your P800.
Set-up
Speed dial numbers
To set a speed dial number
1. Select from the button bar.
2. Select an empty position.
3. Select the desired contact.
4. Select .
Done
to
.
p
Show contact
Phone