Battery - PEUGEOT BIPPER Handbook

BATTERY

Models without Stop & Start
A. Metallic positive point of your vehicle.
B. Slave battery.
C. Earth of your vehicle.
D. Metallic positive point on your vehicle.
Charging the battery using a battery charger
Never charge a battery without first
disconnecting the terminals.
- Disconnect the two quick-fi t battery terminals.
- Follow the instructions for use given by
the battery charger manufacturer.
- Check that the battery posts and
terminals are clean. If they are covered
with sulphate (white or greenish deposit),
disconnect them and clean them.
- Reconnect the two quick-fit terminals,
starting with the negative (-) terminal.
Starting using another battery
- Connect the red cable to the metallic
point A then to the positive (+) terminal of
the slave battery B .
- Connect one end of the green or black
cable to the negative (-) terminal of the
slave battery B .
- Connect the other end of the green or
black cable to the earth point C on your
vehicle (never to the metallic point D of
your vehicle).
- Operate the starter, let the engine run.
- Wait for the engine to return to idle, then
disconnect the cables.
Battery
7