I Mounting The Transceiver; D Inverting The Front Panel - Icom IC-F610 Instruction Manual

4
CONNECTION AND MAINTENANCE

I Mounting the transceiver

The front panel can be inverted for correct viewing while leav-
ing the built-in speaker facing away from the mounting surface.

D Inverting the Front panel

q Unscrew the 2-side screws.
w Remove the Front panel forward from the transceiver.
e Invert the transceiver 180° clockwise as below.
r Insert the Front panel to the transceiver.
15
t Tight the 2 screws.
NOTE:
• NEVER rotate the transceiver more than 180°.
• DO NOT spread the flat cable too much on the transceiver.
Damage may occur.