Using An Iphone Or Ipod - Magnadyne Aquavibe MD-150 Operation And Installation Manual

Sound Controls
Mute:
Press the button to mute the volume level.
Press the button again to restore the volume.
Note: If the unit is in either the IPOD or Bluetooth
mode pressing the
back. Press the
playback.

Using an IPHONE or IPOD

Inserting an IPHONE or IPOD into Docking
Station:
1. Open the waterproof door.
2. Remove the 30-pin connector from its
recessed area.
3. Plug the 30-pin connector into the Apple device.
4. Secure the Apple device with the mounting straps.
5. Close the waterproof door.
Note 1: If your Apple device uses a lightning
connector a lightning adapter will plug into the
30-pin connector and will allow you to operate
the device normally.
Note 2: If you use the USB cable that came with
your Apple device and plug it into the Charge
Only socket it will only charge the Apple device.
Operating an IPHONE or IPOD:
Selecting the IPOD Mode:
Press the MODE button until "IPOD" appears in
the display.
Note 1: The unit will automatically switch to the
"IPOD" mode when the IPHONE or IPOD is ini-
tially connected to the 30-pin connector.
Note 2: The display will show Track/Elapsed
Time, Title, Artist and Album.
(Continued)
button will pause play-
button again will resume
RDM
TRACK VOL
SEL
MODE RPT
Aux In 1 Charge Only
RDM
SEL
MODE RPT
Aux In 1 Charge Only
RDM
TRACK VOL
SEL
MODE RPT
Aux In 1 Charge Only
30-Pin
Connector
7