Button Locations And Functions - Magnadyne Aquavibe MD-150 Operation And Installation Manual

Button Locations and Functions

1 2 3 4 5 6
RDM
RPT T SEL
MODE
Aux In 1
1. Power and Mode Button:
Power Button: Press to turn the entertainment
center on. Press and hold the button for 2
seconds to turn the unit off.
Mode Button: Press to select between input
sources:
Radio: FM tuner.
IPOD: 30-pin connector. (Can be selected
only when connected to a device).
Aux in 1: 3.5mm jack.
Aux in 2: Rear RCA connectors.
Bluetooth: Wireless connectivity.
2. Random Button (RDM): Press the button for
random controls in IPOD and Bluetooth modes.
3. Repeat Button (RPT): Press the button for
repeat controls in IPOD and Bluetooth modes.
4. Play/Pause Button (
Radio or Auxiliary Mode: Press to mute the
audio.
IPOD or Bluetooth Mode: Press to pause
playback.
5. Select Button: Press to toggle between: bass,
treble, balance, fader, equalizer, area, loudness
and local/distance settings.
7 8
TRACK VOL
Reset
Charge Only
9
):
10
MODE
Aux In 1
14
6. Track Buttons:
Radio Mode: Press for automatic seek up or
seek down of radio stations. Press and hold
to activate manual tuning.
IPOD or Bluetooth Mode: Press to select the
next or previous tracks.
7. Volume: Press to increase or decrease the
volume level.
8. Door Release Handle: Lift up on the door
handle to open the door.
9. Display Area: This area displays mode infor-
mation, in the radio mode the radio frequency
and in IPOD and supported Bluetooth modes
song information is displayed.
10. 3.5mm Jack: Plug a cable into the 3.5mm jack
then into a device (MP3 player or phone) with
a 3.5mm socket. The unit will not control the
device, it simply allows the audio to be played
through the system.
11. Interior Light: When the unit is turned on the
LEDs will automatically illuminate the interior
compartment.
12. Reset/Pair Button (Reset): Press to reset the
microprocessor or pair a wireless remote.
11 12 13
RDM
TRACK VOL
RPT SEL
Reset
Charge Only
15
3