ACR Electronics Nauticast 2662 User Manual page 62

g) Change Service Password
This screen provides a means to individually configure the Service Password. This password
differs from the User Password as it allows the user access to the Menu „Service
Configuration".
A minimum of 6, a maximum of 8 characters are allowed. The process of configuring the
Service Password is identical to that of User Password configuration (see Menu 5:
Configuration, Submenu 1: Change User Password).
N 1
******* Change Service Password ********
Enter new password :
Repeat new password:
----------------------------------------
Dynamic Keys: Change Service Password
Confirm New Service
[Enter]
Password Input
Save New Service
[Save]
Password
N 1
******* Change Service Password ********
Enter new password :****
Repeat new password:****
----------------------------------------
Dynamic Keys: Change Service Password
Save New Service
[Save]
Password
Y1-03-0211 Rev D
o o
25' E 0 18' |1>0.10|2>1.30|3>1.80nm
{Length: 4..8 characters}
| Enter | |
[M8]
o o
27' E 0 20' |1>0.10|2>1.30|3>1.80nm
{Length: 4..8 characters}
| Save | |
[M8]
| Back
Return to Submenu
[Back]
Service Configuration
| Back
Return to Submenu
[Back]
Service Configuration
58