Table of Contents
Advertisement
Setup and Use
5
Point microphone directly toward crib or play area.
6
Unwrap and fully extend power cord for best transmission.
Insert power cord plug into wall outlet.
7
Rotate transmitter power/volume dial to turn power on.
Power indicator lights.
8
Place receiver where you will see or hear it.
9
Unwrap and fully extend AC adaptor cord for best reception.
Insert AC adaptor jack into receiver socket and plug into
wall outlet.
Note: To use a 9V alkaline battery for power source, refer to
"Remote Control/Receiver Battery Installation" instructions
on page 3.
Rotate remote control/receiver power/volume dial to turn
10
power on. Power indicator lights. Rotate power/volume dial
to adjust volume.
If you have any questions about this product:
In Canada, call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2.
In Great Britain, telephone 01628 500303.
In Australia, Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870,
Richmond, Victoria 3121 Australia. Consumer Advisory Service 1-800-800-812 (valid
only in Australia).
8
Advertisement
Table of Contents
