Henny Penny 500 Service Manual page 71

I'his section provides troubleshooting information in
the form of an easy to read table.
If a problem occurs during the first operation of a new
fryer, recheck the installation per Section 2 of this
manual.
Before troubleshooting, always recheck the operating
procedure per Section 3 of this manual.
To isolate a malfunction, proceed as follows:
1. Clearly define the problem (or symptom) and when
it occurs.
2. Locate the problem in the troubleshooting table.
3. Review all possible causes. Then, one-at-a-time
work through the list of corrections until the prob-
lem is solved.
efer to the maintenance procedures in Section
5 to safely and properly make the checkout and
repair needed. If maintenance procedures are not
followed correctly, injuries and/or property
damage could result.