Cleaning; Maintenance; Motor Seal; Blades And Plates - Robot Coupe CL 55 e User Manual

dice
d 5x5 carrot /courgette / cucumber / celeriac
d 8x8
potato / carrot / courgette / beetroot
d 10x10 potato / carrot / courgette / beetroot /turnip / onion /
apple (fruit)
d 14x14 potato / carrot / courgette / turnip / celeriac
d 20x20 potato / carrot / courgette / pineapple / turnip
d 25x25 potato / courgette / turnip / apple (fruit) / melon /
watermelon
d 50X75 salad
FReNcH FRieS
F 8x8 potato
F 10x10 potato
F 10x16 potato
w A R N I N G
As a precaution, always unplug your appliance
before cleaning it (risk of electrocution).
After removing the head of the vegetable
preparation machine, take off the disc, followed by
the grid and discharge plate where necessary.
Dishwashers are best avoided in order to prevent
the aluminium from becoming tarnished. Instead we
recommend that you clean the machine by hand using
washing-up liquid.
If you do put your machine in a dishwasher, we sug-
gest that you use a detergent designed specially for
alu minium.
Never immerse the motor base in water. Clean it
with a damp cloth or sponge.
Check that your detergent is suitable for
cleaning plastic parts. Some washing agents are too
alkaline (e.g. high levels of caustic soda or
ammonia) and totally incompatible with certain
types of plastic, causing them to deteriorate rapidly.

• MOTOR SEAL

The motor seal on the shaft should be lubricated
regularly using a food safe lubricant.

CLEANING

In order to keep the motor completely watertight,
it is advisable to check the motor seal regularly for
wear and tear and replace if necessary.
The motor seal can be easily replaced without
having to remove the motor, so we strongly advise
you to ensure that is in good condition.

• BLADES AND PLATES

The blades on all our discs are wearing parts
that need to be replaced from time to time, in
order to maintain consistently high cutting
quality.

• GRATING DISCS

Grating discs deteriorate over time. We recommend
you replace them from time to time, in order to
maintain consistently high cutting quality
I M P O R T A N T

MAINTENANCE

TECHNICAL
SPECIFICATIONS

• wEIGHT

Net
CL 55 without a trolley 27 kg
Motor base 18 kg
Pusher feed-head 9 kg
Hole feed-heads 8,5 kg
Automatic feed-head 6 kg
Stainless steel stand 8 kg
Disc 0,5 kg
• DIMENSIONS (in mm)
Gross
33 kg
19 kg
14 kg
10,5 kg
7 kg
10 kg
0,6 kg
11
20/03/2017