Robot Coupe CL 55 e User Manual page 9

Position your chosen
❷
disc:
a) if you have opted
for a slicing, grating or
julienne disc: position the
disc on the motor shaft. To
ensure that it is correctly
positioned, turn it in a
clockwise direction.
b) You have chosen a dicing unit:
i.e. a grid and a special slicing disc for diced
vegetables.
Slicing discs and dicing grids can be mounted in
the following combinations:
Dicing grid 5x5 8x8 10x10
mm mm mm
Slicer
• • •
5 mm
• • •
8 mm
• • •
10 mm
• • •
14 mm
• • •
20 mm
• • •
25 mm
You will find all the combinations marked
machines and accessories price list.
The dimensions of the dicing grid should always be
equal to or greater than those of the slicing disc.
Place the dicing grid in
the bowl of the vegetable
processor.
M a k e s u r e t h a t t h e
spur on the grid is fully
engaged in the locking
slot of the motor unit.
8
20/03/2017
c) if you want to use the French fries potatoes
cutting equipment:
This equipment comprises a French fries grid and a
special French fries slicing disc.
14x14 20x20 25x25
mm mm mm
• • •
• • •
• • •
• • •
• • •
• • •
• on our
Position the French fries
grid in the vegetable
preparation bowl.
Check that it is correctly
positioned with the French
fries plate positioned at
the outlet.
No tools (loading cone or cabbage corer) are
required when using the divider.
Next, fit the corresponding
slicing disc (straight-
edged blade) and rotate
in a clockwise direction to
ensure that it is correctly
positioned.
WARning
PUsHER FEED HEAD
To get the very best results
when cutting french fries,
remember to insert the
removable divider in the hopper
and load the potatoes into the
left-hand compartment (see
photo opposite).
Next fit the appropriate
slicing disc and rotate in
a clockwise direction to
check that it i correctly
positioned.
❸ The choice of disc-fixing tool will vary according
to the hopper and the type of vegetable:
Hopper Vegetable
All types except
Pusher
for cabbage and Loading cone
french fries
Cabbage corer
Pusher Cabbage
+ key
Removable
Pusher French fries
partition
Automatic All Agitator
4-hole All No tool
Screw the tool (unless you are using the removable
partition) firmly onto the motor shaft.
Tool
+