Table of Contents
Advertisement
4
28
Software setup
First time startup
When the unit is started for the first time, or after a factory default,
the unit displays a series of dialogs. Respond to the dialog prompts
to make fundamental settings.
You can perform further setup and later change settings using the
system settings dialogs.
Software setup sequence
1
General settings - refer to "System settings" on page 29.
•
Make general settings as desired
2
Advanced settings - refer to "Advanced" on page 29.
•
Enable or disable features
•
Review the advanced setting options and make changes
as desired
3
Source selection - refer to "Network settings" on page 48.
•
Make sure that the proper external data sources have
been selected
4
Feature setup
•
Configure specific features as described later in this
chapter
Turning the system on and off
The system is turned on by pressing the Power key.
Press and hold the Power key to turn the unit off.
You can also turn the unit off from the System Controls dialog.
If the Power key is released before the shut-down is completed, the
power off process is cancelled.
The settings dialog
The software setup is done from the settings dialog.
Software setup
| HDS Live Installation Manual
Hide quick links:
Advertisement
Table of Contents
