Operating the Tractor
Figure 6. Raising & Lowering Mower
A. Mower Lift Lever
B. Mower Height Adjuster
MOWER DECK REMOVAL &
INSTALLATION
Removing the Mower Deck
1. Park tractor on a hard, level surface such as a con-
the key and apply parking brake.
2. Place mower in the lowest cutting position using the
mower height adjuster (B, Figure 6).
3. Place the mower lift lever (A, Figure 6) in the lowest
position.
4. Disconnect the mower lift arm from the tractor lift arm
(A, Figure 7). Re-install washer and safety clip.
5. Remove belt from PTO pulley (8, Figure 8).
A
CAUTION 7
The muffler and surrounding areas may be hot.
loaded lever (B, Figure 9) and lift mower hitch off of
the tractor brackets.
side of tractor.
Figure 7. Lift Arms
(Viewed from underneath right side of tractor)
A. Mower Lift Arm
B. Tractor Lift Arm
I
Figure 6. Removing & Installing Belt
A. Idler Arm
I ,
Figure 9. Mower Hitch
A. Tractor Hitch Brackets
B. Spring-Loaded Lever
1 2
C. Flat Washer
D. Safety Clip
B. PTO Pulley