BenQ PD Series User Manual page 61

Item
HDR Demo (Works only if the input content is HDR-compatible)
When the function is activated, all color modes are available
for a comparison between HDR and non-HDR image
representation. See
availability on page 62
If this function is activated and a non-HDR mode is selected, the
input HDR content may be represented inappropriately.
Auto Once enabled, the specific port will be in the input auto
Switch select loop. Otherwise, it can only be selected by input select
or by hot key.
Available only when KVM Switch > Video Input is set to None.
Ergonomics Smart
Reminder
Time
Interval
(min.)
Duration
(sec.)
Power If this function is disabled, the Thunderbolt™ 3 / USB ports
Awake are not supplied with power while the monitor is in standby
mode.
To keep supplying power to the Thunderbolt™ 3 / USB ports
in monitor's standby mode, change the setting to ON.
Advanced DDC/CI
Function
HDR Demo options and HDR function
for more information.
Decides to display the pop-up message that
reminds you to rest your eyes.
Sets the interval of the reminder message.
Sets the time the reminder message lasts on
the screen.
Allows the monitor settings to be set through
the software on the PC.
DDC/CI, short for Display Data
Channel/Command Interface, which was
developed by Video Electronics Standards
Association (VESA). DDC/CI capability allows
monitor controls to be sent via the software for
remote diagnostics.
Range
• ON
• OFF
• DP Auto
Switch
• HDMI Auto
Switch
• ON
• OFF
• 20
• 40
• 60
• 80
• 100
• 5
• 10
• 15
• 20
• 25
• Thunderbolt
3
• USB
• ON
• OFF
Navigating the main menu 61