BenQ PD Series User Manual page 15

Lift the end of the monitor stand high and orient and
align the stand arm with the monitor, then push them
together until they click and lock into place.
Gently attempt to pull them back apart to check that
they have properly engaged.
Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
You might want to adjust the monitor stand height. See
Adjusting the monitor height on page 22
information.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
Your monitor is an edge-to-edge monitor and should be
handled with care. Avoid finder pressure on the screen
surface. Adjust the screen angle by placing your hands on the
top and on the bottom of the monitor as illustrated.
Excessive force on the display is prohibited.
for more
2
1
How to assemble your monitor hardware 15