1.3
Mounting the Rack Console Table, Keyboard
1. Fasten right and left side table brackets to the console frame with six M5x20 bolts supplied as
accessories.
2. Lay the rack console table on the top of the table brackets.
3. Fasten the rack console table with five M6x15 flat head screws.
Rack Console
Table
Table Bracket
(Left)
*=M5x20 bolt (w/spring washer and flat washer)
How to fix the keyboard for the terminal unit to the tabletop
1. Cut the rubber cap at the front of the console beneath the No.1/No.2 terminal unit, and pass
the printer cable through it.
M4x10
screw
2. Unfasten two screws (M4x10) to detach the front cover.
Bolt
Flat head
Screw
Rubber cap
M6 bolt
Flat Head Screw
Bolt*
Flat Head
Screw
M6 bolt
Front cover
Table Bracket
(Right)
M4x10
screw
1-5