Furuno RC-1800F2 Installation Manual
  1. Manuals
  2. Brands
  3. Furuno Manuals
  4. Radio
  5. RC-1800F2 Series
  6. Installation manual
Furuno RC-1800F2 Installation Manual

Furuno RC-1800F2 Installation Manual

Gmdss radio station
Hide thumbs Also See for RC-1800F2:
Table of Contents

Advertisement

Quick Links

Download this manual
GMDSS Radio Station RC-1800F2
SAFETY INSTRUCTIONS ............................................................................ i
SYSTEM CONFIGURATION ....................................................................... ii
EQUIPMENT LISTS.................................................................................... iv
1. MOUNTING .........................................................................................1-1
1.1
Mounting Considerations..........................................................................................1-1
1.2
Mounting the Channel Base and Rack Console ........................................................1-3
1.3
Mounting the Rack Console Table, Keyboard ...........................................................1-5
1.4
Mounting the Printer PP-510 .....................................................................................1-6
1.5
Mounting the SSAS Alert Unit IC-307........................................................................1-7
1.6
Connection of Antenna Cable for DSC Function .......................................................1-8
1.7
Lamp Assembly (Option) ...........................................................................................1-9
2. WIRING ...............................................................................................2-1
2.1
Wiring Diagram ..........................................................................................................2-1
2.2
Terminal Wiring .........................................................................................................2-2
2.3
Connection of External Equipment ............................................................................2-6
2.4
JIS (Japan Industrial Standards) Cable Data ............................................................2-8
3. CHECKING OPERATION ...................................................................3-1
3.1
Checking Operation of Equipment.............................................................................3-1
3.2
General Check...........................................................................................................3-1
3.3
Instructions for Cancelling Distress Alert ...................................................................3-5
PACKING LIST ........................................................................................ A-1
OUTLINE DRAWINGS............................................................................. D-1
INTERCONNECTION DIAGRAM ............................................................ S-1
All brand and product names are trademarks, registered trademarks or service marks of their respective holders.
INSTALLATION MANUAL
www.furuno.co.jp

Advertisement

Table of Contents
loading

Related Manuals for Furuno RC-1800F2

Summary of Contents for Furuno RC-1800F2

  • Page 1: Table Of Contents

    INSTALLATION MANUAL GMDSS Radio Station RC-1800F2 SAFETY INSTRUCTIONS ................i SYSTEM CONFIGURATION ............... ii EQUIPMENT LISTS..................iv 1. MOUNTING ..................1-1 Mounting Considerations..................1-1 Mounting the Channel Base and Rack Console ............1-3 Mounting the Rack Console Table, Keyboard ............1-5 Mounting the Printer PP-510 ..................1-6 Mounting the SSAS Alert Unit IC-307................1-7...
  • Page 2 The paper used in this manual is elemental chlorine free. ・FURUNO Authorized Distributor/Dealer 9‑52 Ashihara‑cho, Nishinomiya, 662‑8580, JAPAN Telephone : +81‑(0)798‑65‑2111 Fax       : +81‑(0)798‑65‑4200 A : MAY 2008 All rights reserved. Printed in Japan C : OCT . 05, 2009 Pub. No. IME‑56640‑C *00016903512* *00016903512* (HIMA ) RC‑1800F2 *00016903512* *00016903512* * 0 0 0 1 6 9 0 3 5 1 2 *...

  • Page 3: Safety Instructions

    Standard Steering Turn off the power at the switchboard compass compass before beginning the installation. RC-1800F2 3.7 m 2.5 m Fire or electrical shock can result if the power is left on.

  • Page 4: System Configuration

    SYSTEM CONFIGURATIONS RC-1800F2-1S/2S/5S RC-1800F2-1S: FS-1570, one FELCOM 15 RC-1800F2-2S: FS-2570, one FELCOM 15 RC-1800F2-5S: FS-5070, one FELCOM 15 Whip Antenna 04S4176 SSB Antenna Automatic Antenna Antenna Coupler Inmarsat-C Switch AT-1560-15 Antenna Unit AS-102 (for 150 W) IC-115 AT-1560-25 (for 250 W)
  • Page 5 RC-1800F2-1D/2D/5D RC-1800F2-1D: FS-1570, two FELCOM 15 RC-1800F2-2D: FS-2570, two FELCOM 15 RC-1800F2-5D: FS-5070, two FELCOM 15 SSB Antenna Automatic Antenna Inmarsat-C Antenna Coupler Switch Antenna Unit AT-1560-15 Whip Antenna AS-102 IC-115 (for 150 W) 04S4176 AT-1560-25 (for 250 W) Preamp...

  • Page 6: Equipment Lists

    EQUIPMENT LISTS Standard Supply Name Type Code No. Remarks Rack Console RC-1800F2 See table below. Antenna Unit IC-115 For 2D type, two units are supplied. Antenna Coupler AT-1560-15 For FS-1570 AT-1560-25 For FS-2570 AT-5000 For FS-5070 Printer PP-510 Distress Alert/...
  • Page 7 Option Name Type Code No. Remarks Preamp Unit FAX-5 Distress Alert Unit IC-302-DSC Incoming indicator IC-303-DSC BK Interface BK-300 Antenna Unit IC-115 Distress Alert/Received IC-305 Call Unit Alarm Unit IC-306 SSAS Alert Unit IC-307 EGC Printer PP-505 Control Unit FS-2571C Antenna BK Relay OP05-35-H 000-056-878...
  • Page 8 Name Type Code No. Remarks Installation Materials CP24-00151 005-931-190 For PR-240 CP16-03620 000-043-648 50 m, w/pipe, for FEL- COM15 CP05-09010 005-954-180 10 m cable set CP05-09020 005-964-410 25 m cable set CP05-09030 001-079-290 10 m cable set CP05-09040 001-079-320 25 m cable set CP16-03610 000-043-647 30 m, w/pipe, for...
  • Page 9 Name Type Code No. Remarks Strain Insulator YT-180 #18 000-166-342-10 5P Cable 05S0309 000-106-043-10 10 m 000-106-044-10 20 m 000-106-046-10 30 m 000-106-047-10 40 m 000-106-048-10 50 m 05S0793 000-125-984-10 10 m 000-125-986-10 20 m 000-125-987-10 30 m 000-125-988-10 40 m 000-125-989-10 50 m COSPEVVSBC...
  • Page 10 Name Type Code No. Remarks Cable Assy. 17JE23150- 000-146-015 02 (D8C) 000-146-016 10 m 000-146-017 20 m 000-146-018 30 m 000-146-019 40 m 000-146-020 50 m Clock KS474M 000-166-300-10 Multimeter CX-506A 000-150-468 SP-21 000-165-303 Aerometer No. 4 000-440-516 Thermometer -20C.-100C 000-440-517 Lamp NL-54...

  • Page 11: Mounting

    1. MOUNTING Mounting Considerations 1.1.1 Mounting considerations for RC-1800F2 As shown on the next page, the rack console is normally installed on the bridge. Install the rack console where the equipment can be easily operated, checked and serviced. Con- sult with shipyard personnel and ship’s officer-in-charge to determine best location. The location must satisfy the following points: •...
  • Page 12 NX-5...

  • Page 13: Mounting The Channel Base And Rack Console

    Weld all sides of the channel base to the deck. Fasten the rack console to the channel base with six M12 bolts. After leading in cables through the rear of the rack console, cover cable entrances with putty or silicone sealant to close any gaps. RC-1800F2 Remove eyebolts and cover with four cosmetic caps. Rear cable entrance...
  • Page 14 Grounding the copper plate Weld a steel plate with copper strap, and connect it to the rack console. Solder the point where the copper plate connects to the copper platge support, to prevent corrosion and to ensure tight connection. CAUTION Ground the equipment to prevent interference and electrical shock.

  • Page 15: Mounting The Rack Console Table, Keyboard

    Mounting the Rack Console Table, Keyboard 1. Fasten right and left side table brackets to the console frame with six M5x20 bolts supplied as accessories. 2. Lay the rack console table on the top of the table brackets. 3. Fasten the rack console table with five M6x15 flat head screws. Rack Console Table Flat Head Screw...

  • Page 16: Mounting The Printer Pp-510

    3. Unfasten two hex. bolts (M6) to open the front panel of the rack console. Note: Lock the stay at the left-hand side inside the rack console. LOCK Rack console, opening the front panel Stay 4. Connect the keyboard connector to the rear of the IC-215/IB-583. 5.

  • Page 17: Mounting The Ssas Alert Unit Ic-307

    Mounting the SSAS Alert Unit IC-307 Select the mounting location where the button on the unit can be operated easily in an emergency. See the back of this manual for mounting dimensions and recommended clearance space. For cabling, use a cable entrance at the front or bottom of the rack console depending on the mounting location.

  • Page 18: Connection Of Antenna Cable For Dsc Function

    IC-115 Ground for FAX-5 (when No.2 FELCOM 15 (Drill hole in mast; is mounted) fasten ground wire with M4 screw.) RC-1800F2, front view MP-3 Attach MP-7 connector to FMA-1 coaxial cable and connect MP-7 (Installation to MR relay connector.

  • Page 19: Lamp Assembly (Option)

    Lamp Assembly (Option) The lamp assembly (type: L3/12-YLP2, code no.: 000-169-005-10) is optionally available. Mount it as follows. 1. Unfasten two M3 screws from the top of the rack console. 2. Unscrew two M3 screws to remove the bottom plate from the lamp assembly. 3.
  • Page 20 This page is intentionally left blank. 1-10...

  • Page 21: Wiring

    2. WIRING Wiring Diagram No.2 GPS No.1 GPS No.1 VHF WR No.1 VHF No.2 VHF ANT RC-1800F2-50S/50D DSC ANT 3D2V, Max.50 m RC-1800F2-25S/25D RC-1800F2-15S/15D TP5FBAW-5DFBB, 30 m Inmarsat C 8D-FB-CV 50 m, 12D-SFA-CV, 100 m...

  • Page 22: Terminal Wiring

    Terminal Wiring WAGO connectors have three cable holes respectively. You can use any hole to connect the ca- ble. To use the WAGO connector, see the figure shown below. WAGO connector 1 2 3 4 5 1) Insert the slot-head driver, and press it upward.
  • Page 23 Terminal wiring for power system (TB101, 102) Crimp-on lug (local supply) Internal diameter: min. 8 External diameter: max. 22.2 12 13 14 TB 101 18 19 20 12 to 13 mm DC Power Terminal 9 to 10 mm TB 102 10 11 AC Power Crimp-on lug (local supply)
  • Page 24 Terminal wiring for Inmarsat-C (TB103)
  • Page 25 Terminal wiring for battery system (TB104) TB 104 12 13 14 8 to 9 mm to Battery Monitor Terminal wiring for SSB (TB105) TB 105 (continued to the lower) To Antenna coupler To Incoming indicator FS-1570T, FS-2570T or FS-5070T IC-303 8 to 9 mm To Distress Alert Unit External BK...

  • Page 26: Connection Of External Equipment

    Connection of External Equipment 2.3.1 BK connection...
  • Page 27 2.3.2 AF LINE OUT connection...

  • Page 28: Jis (Japan Industrial Standards) Cable Data

    JIS (Japanese Industrial Standards) Cable Data...
  • Page 30 2-10...

  • Page 31: Checking Operation

    3. CHECKING OPERATION Checking Operation of Equipment This section covers checking of the equipment for proper operation. Refer to the respective Instal- lation Manuals shown below. A password is required to do the initial setting. Under no circum- stances shall the operator do the initial setting. •...
  • Page 32 Check point Procedure Pass/Fail FS-1570/2570/5070 Make group call and 1) Arrange the group message as below. Message type: GROUP MESSAGE confirm that the Group ID: 011111111 equipment transmits Priority: ROUTINE DSC message COMM MODE: TELEPHONE COMM FREQ: Any setting is available. DSC FREQ: Tx: 2177.0 kHz, Rx: 2177.0 kHz 2) Press the CALL key to show the message “Group mes- sage in progressed!”.
  • Page 33 Check point Procedure Pass/Fail FELCOM 15 NCS common chan- 1) Turn on the power. 2) Confirm that “SYNC” appears at the bottom of the nel is synchronized screen. Position is correctly Confirm that position data appears at the lower right input corner and is correct.
  • Page 34 Test for printer PP-510 While pressing and holding down the LINE FEED switch to turn on the power. All characters are printed as below. BK check 1. Press the PTT switch of the SSB radiotelephone. 2. Check that the BK relay on BK line-connected equipment (facsimile, receiver, etc.) operates. AF LINE OUT When the receiver of the SSB radiotelephone functions as a facsimile receiver, check AF line out- put as follows:...

  • Page 35: Instructions For Cancelling Distress Alert

    Instructions for Cancelling Distress Alert Procedure Sample message VHF DSC 1) Switch off transmitter immediately. All Stations, All Stations, All Stations 2) Switch equipment on and set to Channel 16. This is NAME, CALLSIGN, DSC NUMBER, 3) Make broadcast to “ALL Stations” giving your POSITION.
  • Page 36 This page is intentionally left blank.
  • Page 44 10/Jun/08 R.Esumi...
  • Page 45 July 14'03...
  • Page 46 Dec. 20, '02...
  • Page 47 pr.17'07 R.Esumi...

  • Page 49: Interconnection Diagram

    ITEM No. TYPE NAME CB101/102 B101 FS-1570T/2570T TRANSCEIVER UNIT SD-121-YL SD-121B-YL B102 FS-2571C CONTROL UNIT B103 IB-583 TERMINAL UNIT DRAWN TITLE RC-1800F2-1S/2S(FS-1570/2570+FELCOM15) B104 IC-215 TERMINAL UNIT T.YAMASAKI 15/Jul/09 B105 HS-2003 HANDSET CHECKED 名称 ラックタイプ無線通信装置 T.TAKENO B106 FP05-05510 HANDSET HANGER 15/Jul/09 ＊１）造船所手配。...
  • Page 50 ITEM No. TYPE NAME CB101/102 B101 FS-5070T TRANSCEIVER UNIT SD-121-YL SD-121B-YL B102 FS-2571C CONTROL UNIT B103 IB-583 TERMINAL UNIT DRAWN TITLE RC-1800F2-5S(FS-5070+FELCOM15) B104 IC-215 TERMINAL UNIT T.YAMASAKI 15/Jul/09 B105 HS-2003 HANDSET CHECKED 名称 ラックタイプ無線通信装置 T.TAKENO 注記 B106 FP05-05510 HANDSET HANGER 15/Jul/09 ＊１）造船所手配。...
  • Page 51 ITEM No. TYPE NAME CB101/102 B101 FS-1570T/2570T TRANSCEIVER UNIT SD-121-YL SD-121B-YL B102 FS-2571C CONTROL UNIT B103 IC-215 No.2 TERMINAL UNIT DRAWN TITLE RC-1800F2-1D/2D(FS-1570/2570+FELCOM15x2) B104 IC-215 No.1 TERMINAL UNIT T.YAMASAKI 15/Jul/09 B105 HS-2003 HANDSET CHECKED 名称 ラックタイプ無線通信装置 T.TAKENO 注記 B106 FP05-05510...
  • Page 52 ITEM No. TYPE NAME CB101/102 B101 FS-5070T TRANSCEIVER UNIT SD-121-YL SD-121B-YL B102 FS-2571C CONTROL UNIT B103 IC-215 No.2 TERMINAL UNIT DRAWN TITLE RC-1800F2-5D(FS-5070+FELCOM15x2) B104 IC-215 No.1 TERMINAL UNIT T.YAMASAKI 15/Jul/09 B105 HS-2003 HANDSET CHECKED 名称 ラックタイプ無線通信装置 T.TAKENO B106 FP05-05510 HANDSET HANGER...

Table of Contents