Door Bottom Seal; Tub Gasket And Trim - EdgeStar BIDW1802 Service Manual

Door Bottom Seal

The door bottom seal prevents water leakage by sealing the bottom of the door to the
tub. It cannot be replaced as a separate part on this dishwasher. It must be replaced as
part of the inner door panel. (See Inner Door Panel.)

Tub Gasket and Trim

The dishwasher tub seal prevents water leakage. The seal is fitted in a seal channel
that lines the rim of the dishwasher tub. To remove the tub seal or trim:
1. Open the dishwasher door.
2. Remove the dishwasher tub seal by grasping one end of the seal to peel it away
from the seal channel.
3. Remove the 2 screws and then pull the trim straight up off the lip of the tub.
4. Reverse the above the steps to reinstall.
Note: When installing the tub seal, make sure it is seated properly in the seal channel.
Run your finger over the seal to make sure it is smooth and even for a proper seal. A
correctly installed gasket will have both ends of the gasket equal distance from the
bottom of the tub.
15