FieldFox Analyzer
Analyzer System Operation
The FieldFox analyzer is capable of both network analyzer (NA) and spectrum analyzer (SA) functions.
• Full two port NA functions are supported by the hardware.
Model and option combinations determine available functionality.
• SA functions are supported by the hardware on Port 2.
Model and option combinations determine available functionality.
• A temporary CFG option is available to enable full functionality when needed for service operations.
Details on the CFG option are provided in the N7841A TME help.
See
Figure 5-1
for a simplified block diagram of the overall RF analyzer system.
All FieldFox analyzers covered by this manual have the same hardware. Options to increase
functionality are enabled via licenses, additional hardware is not required.
Functional Groups of the Analyzer
The operation of the analyzer can be separated into two major functional groups. Each group consists of
assemblies that perform distinct functions. Some of the assemblies are related to more than one group,
and both groups, to some extent, are interrelated and affect each other's performance.
The major functional groups are:
•
Front Panel Group
•
Measurement Group
Front Panel Group
The front panel group consists of the following:
•
A2 LCD Assembly
•
A3 Front Panel Interface Board
Measurement Group
The measurement group consists of the following:
•
A4 RF Board
•
A5 System Board
•
A6 SOM Board
•
A7 Real Time Clock Board
•
Main Battery
N9927-90003
Theory of Operation
Analyzer System Operation
5-3