Operating Limits - Trane CGCN Installation Operation & Maintenance

Make sure that during transport the unit will not arrive in wrong positions. A momentarily horizontal
positioning of the unit can lead to irreversible damage to the compressors. Faultiness arising from
incorrect transport is not covered by the manufacturer warranty. Immediately report an incorrect
receipt of goods. An arrow positioned upward, indicating the vertical position of the unit
WARNING! Both the lifting ropes that the spreader bar and/or balance must be sized to hold the weight of the unit
safely. Check the weight of the unit on the nameplate of the unit. Weights provided in the tables "Technical data"
in the "General Information" refers to standard units, without any additional options.
The unit may have specific accessories that increase the overall weight (pumps, copper / copper coils, etc..). The
unit must be lifted with the utmost attention and care. Avoid abrupt lifting.

Operating limits

Storage
The units can be stored within the following environmental conditions:
Min ambient temperature
Max ambient temperature
Max. relative humidity
WARNING! Storage at temperatures below the minimum specified can cause damage to some parts including
the electronic controller and its LCD display
opening of the safety valves placed on the suction line of compressors. Condensation (too high humidity) can
damage electronic components.
: -10°C
: +53°C
: 95% not condensable
.
Storage at temperatures above the maximum indicated causes the
Verify the perfect
stability during the
handling operations
of the unit. Do not
perform dangerous
operations that
could damage the
unit.
Lifting
holes