Security Settings - Belkin OmniView SMB F1DP101M User Manual

Remote Installation
Step 7 Security Settings
The Security-Settings page allows you to configure security features for the IP
Device. To open the Security-Settings page, click "Settings" under "Security" in
the far-left menu (see Fig. 6).
You can configure the following security features:
Account Blocking
Specify the number of invalid login attempts allowed before the user is
locked out.
Password Policy
Choose between a standard- or high-security password policy. The table below
shows the parameters of the two options available. Check the box to enable the
high-security password policy, or leave unchecked to enable the
standard-security policy.
Standard-Security Password
6 characters or more
Must not include the user name
Fig. 6 Security-Settings Page
High-Security Password
8 characters or more; must include at
least 1 digit and 1 uppercase letter, and 1
of the following "special" characters:
!@#$%^&*()_-+={[}]"':;?/><
Must not include the user name
1
2
3
4
5
6
7
8
9
26