Siemens SITRANS LG270 Operating Instructions Manual page 34

Setup - Units
Setup - Probe length
Setup - Application - Type
of medium
Setup - Application - Ap-
plication
Setup - Application - Me-
dium, dielectric constant
34
In this menu item you select the distance unit and the temperature
unit.
For the distance units you can choose between m, mm and ft and for
the temperature units °C, °F and K.
In this menu item you can enter the probe length or have the length
determined automatically by the sensor system.
When choosing "Yes", then the probe length will be determined
automatically. When choosing "No", you can enter the probe length
manually.
Coax probes can be only used in liquids. In this menu item, the fixed
adjusted medium type "Liquid" is displayed.
In this menu item, you can select the application. You can choose
between level measurement and interface measurement. You can
also choose between measurement in a vessel or in a bypass or
standpipe.
Note:
The selection of the application has a considerable influence on all
other menu items. Keep in mind that as you continue with the param-
eter adjustment, individual menu items are only optionally available.
You have the option of choosing the demonstration mode. This mode
is only suitable for test and demonstration purposes. In this mode, the
sensor ignores the parameters of the application and reacts immedi-
ately to any change.
In this menu item, you can define the type of medium (product).
This menu item is only available if you have selected level measure-
ment under the menu item "Application".
SITRANS LG270 - Operating Instructions PBD-51041064