Deleting Groups - Honeywell 301C User Manual

System Programming
Groups Menu

Deleting Groups

You can use the empty all groups command to delete all groups
previously programmed in the controller.
Single groups can be deleted with a simple procedure:
• Scroll to the first transmitter in the group list,
• Select the transmitter (its address blinks) and scroll to <del> (<del>
erases the entry and <end> marks the end of the stack)
• Press enter and the group is emptied.
This procedure makes it possible to delete one, several or all entries
previously included in a group.
Note: You can create up to 126 groups, with a maximum of 128
members each.
42 301C User Manual
Honeywell
510324
4/07