Table of Contents
Advertisement
Transport, e. g. when
moving
Preparing and inserting the
transport bolts
46
Before transporting the washing machine:
– Turn off the tap.
– Reduce the water pressure in the water inlet hose
(refer to page 32).
– Drain any residual washing solution (refer to page
31).
– Disconnect the washing machine from the mains.
– Dismantle the supply and drainage hose.
– Install transportation protection devices.
Having transported the appliance and ensured proper
installation and connection, allow the Spin Í
programme to run through before starting the first
wash programme.
Transporting the washing machine:
Remove the 4 covers C.
■
Remove the rear cover D and prepare the transport
■
bolts.
Insert and tighten the transport bolts.
■
D
C
Advertisement
Table of Contents
