Table of Contents
Advertisement
Start in time
21
Before a programme starts, you can specify by how
many hours the start of the programme is to be
delayed.
Turn the programme selector to desired programme.
"wash/ready" control light flashes. LED dsplay shows
the
remaining time
Press the "3" button. The LED shows "
■
(
=hour).
Press the "3" button again to select the desired
■
start in time.
² The start in time can be set in 1-hour steps. The
maximum start in time can be set to 24 hours. If a
start in time of 24h has been set, the "
accessed by pressing the "3" button again.
² The start in time start working after pressing the-
Start Soaking A button. The cursor between
number and
elapses and the programme starts.
² The start in time is counted down by hour. When the
start in time has elapsed, the programme starts
automatically and the remaining time is displayed.
² The start in time can be changed at any time before
the programme starts.Press the "3" button until the
required time appears.The selected programme will
not be changed.
² If the programme was changed, the start in time was
terminated also. The LED will displays remaining
time. If required, reset the start in time.
² You can add/remove laundry during the period of
start in timeworks. Close the loading door
immediatelly after finishing loading/removing.
flashes until the start in time
"
" can be
Advertisement
Table of Contents
