Cleaning water inlet
strainers
Cleaning the strainer at the
water tap
Cleaning the strainer on the
washing machine
32
This is necessary if very little or no water flows into the
washing machine.
First, reduce the water pressure in the inlet hose:
Turn off the tap.
■
Turn the programme selector to any programme
■
(except Spin
Í
Press the Start Soaking A button, and allow the
■
programme to run for approx. 40 seconds.
Disconnect the hose fror the water tap.
■
Rinse the strainer under flowing water.
■
Connect the hose.
■
Disconnect the hose fror the back of the
■
washing machine.
Pull out the strainer and rinse under running water.
■
Insert the strainer and reconnect the hose.
■
Turn on the water tap and check whether water is
■
still discharged. If water is leaking, check that the
filter is correctly seated.
Turn off the tap.
■
and
Empty [).