Bosch WAG16260IN Operating And Installation Instructions page 20

Remaining time
20
When the programme has been selected, the expected
programme duration is displayed.
Turn the programme selector to desired
■
programme. "wash/ready" control light flashes.
LED dsplay shows the remaining time, e.g. 1:18= 1
hours and 18 minutes.
When the programme has ended, it display "
■
Rinse hold was selected, it displays "˜" after the
programme ends.
² While the programme is running, the programme
duration may be extended or reduced for the follow-
ing reasons.
Reductions in time occur because of:
– small loads,
– reduced heating times,e.g. if the water is hot.
Increases in time occur because of:
– additional rinse cycle if excessive foam is in the
laundry,
– multiple spinning if the laundry is distributed poorly
in the drum,
– increased heating times,e.g. when the water is too
cold,
– water pressure too low,
– selection of an additional option,e.g. Rinse Plus O
function after the programme has startd,
– very absorbent washing extends the heating
duration.
" If
›