Bissell STAINPRO 1623 SERIES User Manual page 10

Operation
Fill the 2-in-1 water tank
(continued)
5. Replace the top of the tank by matching
the lid and tank edges. Handle must be in
the forward position in order to replace lid.
Rotate the handle to the carrying position to
latch the lid.
Note: Remember to secure the lid and test
to make sure it is secure before picking up
the tank.
6. Place tank into machine base, seating firmly
in place. Rotate tank handle back into
latched position.
Carpet cleaning strokes
1. Plug the deep cleaner into a proper outlet.
Turn the power ON by pressing the red
power switch on the back of the unit with
your foot.
2. With your foot, press the gray handle release
lever located on the back of unit below
water tank.
3. While pressing the spray trigger, make one
slow forward wet pass and another back.
Let the BISSELL 2X advanced deep cleaning
formula and DirtLifter PowerBrush do the
work for you. Caution: Do not overwet.
4. Release the spray trigger and make one slow
forward and backward pass over the same
area to remove any residual dirty water and
aid in drying.
5. Repeat cleaning passes until solution being
pulled up appears clean. Continue passes
without pressing the trigger until you can't
see any more water being suctioned up.
10
www.BISSELL.ca
5.
6.
Handle Release Power Switch
TIP: Remove large debris
and loose impediments
before deep cleaning to
prevent early clogging of
the lint trap.