Data Reset - BAFANG DP C01.RS 232.7 User Manual

In the parameter setting state, when the parameter to be set begins to flash, press
the "up" or "down" key to adjust the parameter value. Press the "mode" key to switch
among the to-be-set parameters. Press the "mode" key two times (the interval
between the two pressing actions should be shorter than 0.3 seconds) to exit
parameter setting state.
* In the parameter setting state, if no operation is performed to the display for 10
seconds, the display will return to the normal riding state.

Data Reset:

After pressing the "mode" key 2 times (the interval between the two pressing
actions should be shorter than 0.3 seconds), the display enters the MENU state. In this
state, the speed field displays tC and then also displays y after pressing the "up" key.
At this moment, the temporary data, including maximum speed (MAXS), average
speed (AVG) and single-trip distance (TRIP) can be cleared. After this setting, press the
"mode" key for shorter than 0.3 seconds to enter the km/mile setting interface.
If the user has never made any reset operation, the single trip distance and the
accumulated riding time will be automatically cleared when the accumulated riding
time exceeds 99 hours and 59 minutes.
*When the display or the bicycle powers off, the above-mentioned data won't be
cleared!
54