External Rpm-Detecting Sensor Installation - BAFANG DP C01.RS 232.7 User Manual

Match the female connector at the display with the male
connector at the EB-BUS as shown in the picture above.

2.5 External RPM-detecting Sensor Installation

Before installing the external RPM-detecting sensor, please
make sure the gap between the speed-detecting sensor and
the magnetic steel is between 5 to 25 mm.
H. female connector at
the display
h. male connector at the
EB-BUS
A. external RPM-
detecting sensor
B. magnetic steel
C. spokes
D. chain stay
19