Cisco UCS 6332 Hardware Installation Manual page 6

Ports on the Cisco UCS 6300 Fabric Interconnects
Note When you configure a port on a fabric interconnect, the administrative state is automatically set to enabled.
If the port is connected to another device, this may cause traffic disruption. You can disable the port after it
has been configured.
The following table summarizes the second and third generation ports for the Cisco UCS fabric interconnects.
Item
Description
Form factor
Number of
fixed 10 GB
Interfaces
Number of
1GB
Interfaces
(depending on
the SFP
module
installed)
Unified Ports (
8-, 4-, 2-, 1-
Gbps, FC,
FCoE)
Number of
40-Gbps ports
Unified
Ports(1- or 10
Gbps Ethernet,
or 4-, 8-, or
16-Gbps, Fibre
Channel)
Compatibility
with the IOM
Expansion
Slots
Cisco UCS 6300 Series Fabric Interconnect Hardware Installation Guide
4
Cisco UCS Mini Second Generation
Cisco UCS 6324 Cisco UCS
6248 UP
Fabric Interconnect 48-Port Fabric
with 4 ports and 1 Interconnect
scalability port
1 RU 1 RU
4 32
4 32
4 All
1 —
— None
N/A UCS 2204,
UCS 2208
— 1 (16 port)
Third Generation
Cisco UCS Cisco UCS
6296 UP 6332
96-Port Fabric 32-Port Fabric
Interconnect Interconnect
2 RU 1 RU
48 96 (24 X 4
using 4 x10G
breakout
cables), QSA
48 4 (only ports 1
- 4 with QSA
adapter)
All None
— 32
None None
UCS 2204, All
UCS 2208
3 (16 port) None
Product Overview
Cisco UCS
6332-16UP
40-Port Fabric
Interconnect
1 RU
88 (18 x 4 using 4
x 10G breakout
cables)
Ports 1-16
None
24
Ports 1-16
All
None