Cisco UCS 6332 Hardware Installation Manual page 13

Product Overview
LED
System status
LED
System status
LED
Management Port LEDs
The status of the management ports is listed below.
LED Position
Left
Left
Right
Right
System Environment LEDs
The system environment LED states are listed below.
LED State
Solid amber
Solid red
QSFP Port LEDs
The QSFP port LED states are listed below.
LED State
Yellow
Green
Off
Blinking yellow
Blinking yellow
Location Function
Front and rear Indicate system
power/health at bootup and
run time
Front and rear Indicate system
power/health at bootup and
run time
LED State Description
Off No link
Solid green Physical link
Off No activity
Blinking green Activity
Description
Minor fan alarm (a fan is missing or there is a failure)
Major fan alarm (two or more fans are missing or have failed, or there is a fan direction
mismatch
Description
Enabled, but SFP not inserted
Enabled and link is up
Enabled, but link is not connected
Power On Self Test (POST) failed
Port beacon enabled
Cisco UCS 6300 Series Fabric Interconnect Hardware Installation Guide
Management Port LEDs
Color State Description
Red Solid on Power shut down
by software
Red Blinking Secure boot
validation has
failed
11