Starting The System - Cisco UCS 6332 Hardware Installation Manual

Starting the System

Figure 14: Connecting the System Ground
Item
1
2
3
Step 5 Place the grounding lug against the grounding pad so that there is solid metal-to-metal contact, and insert the
two M4 screws with washers through the holes in the grounding lug and into the grounding pad.
Step 6 Ensure that the lug and cable do not interfere with other equipment.
Step 7
Prepare the other end of the grounding cable and connect it to an appropriate grounding point in your site to
ensure adequate earth ground.
Starting the System
Note Do not connect the Ethernet port to the LAN until the initial system configuration has been performed. For
instructions on configuring the system, see the Configuration Guide for the version of Cisco UCS Manager
that you are using. The configuration guides are available at this URL:
http://www.cisco.com/c/en/us/support/servers-unified-computing/ucs-manager/
products-installation-and-configuration-guides-list.html
Cisco UCS 6300 Series Fabric Interconnect Hardware Installation Guide
32
Description
Grounding Pad
Grounding Cable
M4 Screws
Installing the Cisco UCS 6300 Series Fabric Interconnect