Honda Accord 2008 Body Repair Manual page 83

Main Menu
2-door
10. From inside the passenger's compartment, plug weld
the hole in the inner lower pillar (A) and the front of
side sill reinforcement (B).
B
11. From inside the passenger's compartment, plug weld
the rear of side sill reinforcement (A) to the center
pillar lower inner (B), rear inner panel (C), inside sill
(D), and rear frame joint (E).
C
(6)
L=10 (0.4)
E
12. Plug weld the side sill reinforcement (A) and
reinforcement rear extension (B).
A
Table of Contents
13. Weld the center pillar lower stiffener (A) to the center
A
(2)
L=10 (0.4)
B
A
14. Weld the front pillar lower stiffener (see step 6 on
D
(1)
(3)
B
pillar upper stiffener (B), side sill reinforcement (C),
and inner panel (D).
(5)
A
A
C
(8)
page 3-20).
B
(11)
D
(5)
(cont'd)
3-43