Honda Accord 2008 Body Repair Manual page 70

Main Menu
Center Pillar Outer Panel
Installation (cont'd)
11. From inside the passenger's compartment, plug weld
the hole in the inner lower pillar (A) and the front of
side sill reinforcement (B).
B
12. From inside the passenger's compartment, weld the
side sill reinforcement (A) to the center pillar inner (B)
and inside sill (C).
A
(6)
13. Remove the outer panel repair part, and weld the
center pillar stiffener (A) to the roof side stiffener (B)
and side sill reinforcement (C).
A
(6)
3-30
Table of Contents
(2) L=10 (0.4)
A
B
C
B
A
C
(7)
14. Weld the front pillar lower stiffener (see step 6 on
page 3-20).
15. Weld the patch (A) at the cut section of the body side
outer panel (B).
Center pillar section
B
(3)
A
In case of outer panel only.
40 mm
(1.6 in.)
A
40 mm (1.6 in.)
(3)
A
(3)
B