Main Menu
B
Front pillar section
40 mm (1.6 in.)
Side sill section
40 mm (1.6 in.)
A
16. Install the new center pillar outer separator (A) on the
center pillar stiffener (B).
NOTE: Apply the sealer (C) all the way around the
separator and inside the outer panel repair part (D)
without gaps.
B
D
17. Install the new front pillar outer separator on the front
pillar lower stiffener, and apply the sealer (see step 8
on page 3-21).
18. Clamp the outer panel repair part , and recheck the
clearance and alignment of the door, and front fender.
Table of Contents
(5)
A
B
(7)
A
C
19. Do the main welding. Weld the outer panel repair part
(A) and patch (B).
(33)
[Z]
[VIEW: Z]
A
(36)
(3)
(8)
(2)
(cont'd)
3-31