Main Menu
8. Install the new front pillar outer separator (A) on the
front pillar lower stiffener (B).
NOTE: Apply the sealer (C) all the way around the
separator and inside the outer panel repair part (D)
without gaps.
B
A
C
9. Clamp the outer panel repair part, and recheck the
clearance and alignment of the door, front fender, and
windshield.
10. Do the main welding. Weld the outer panel repair part
(A) and patch (B).
Windshield opening
B
4-door: (14)
2-door: (12)
(2)
L=10 (0.4)
Table of Contents
D
C
(1)
A
4-door: (3)
2-door: (4)
(4)
(10)
(10)
A
(8)
11. Weld the wheelhouse upper member (see step 12 on
page 3-11).
B
4-door:
L=200 (7.87)
2-door:
L=185 (7.28)
(2)
(8)
(23)
4-door: L=360 (14.2)
2-door: L=350 (13.8)
(2)
(5)
B
(7)
3-21