Table of Contents
Advertisement
'88U8
5, June 1999
marked for transfer and placed on hold while the terminal
selects a line for the new call or prompts you to Select a Line.
Dial tone occurs on the selected line.
Retrieve a CaU (No Active CaU Connected)
• Retrieve Line
x
(Menu and Dialog Keys)
Use the menu system to select the Retrieve Line
X
option.
This option is displayed whenever there is a call on hold and
no other call is active.
• Line Key (Desired Call Appearance)
Press the Line key associaled with the held call.
• Preview (Key)/Line Key (Desired Call Appearance)/Connect
(Key)
Press the Preview key to enter the Preview mode; then press
the Line key associated with the held call; finally, press the
Connect key.
Retrieve a CaU (With Another Active Call Connected)
• Une Key (Desired Call Appearance)
To retrieve a held call while another call is active, press the
Une key associated with the held call. The active, connected
call is placed on hold, and the selected call is retrieved.
• Preview (Key)/Une Key (Associated with Held Call)/Retrieve
Une )( (Menu and Dialog Keys)
While one call is active, retrieve another, inactive, call from
hold by first pressing the Preview key to enter the Preview
mode; then press the Line key associated with the held call;
finally, use the menu system to select the Retrieve Line X
option. The active, connected call is placed on hold, and the
selected call is retrieved.
• Preview (Key)/Line Key (Desired Call Appearance)/Connect
(Key)
'ssue 5, June 1999
Retrieve an inactive call from hold while another call is active
by first pressing the Preview key to enter the Preview mode;
then press the Line key associated with the held call: finally,
press the Connect key. The active, connected call is placed on
hold, and the selected call is retrieved.
• Retrieve Line )( During Consultation Call (Menu and Dialog
Keys)
..
During a consultation call, retrieve a held call by selecting the
Retrieve Line X option from the menu system.
The active
consultation call is placed on hold, and the selected call is
retrieved.
• Preview
(Key)/Line
Key
(Associated
with
Held
Call)/Conference (Key)
With an active call in progress, you can form a conference with
an inactive call on hold by first pressing the Preview key to
enter the Preview mode: then press the Line key associated
with the held call; finally, press the Conference key. The held
call is retrieved and merged into the conference.
• Conference (Key or Menu and Dialog Keys)/Select a Line
(Menu and Dialog Keys)/Conference (Key or Menu and Dialog
Keys)
If you invoke a conference (using either the menu system and
dialog keys or the Conference key) while one call is active and
one or more calls are on hold, the Optiset terminal marks the
active call for conference and moves it to hold.
Then the
terminal prompts you to Select a Line.
Press a Line key
corresponding to one of the previously held calls to retrieve
that call.
Then complete the conference by selecting the
Conference option from the menu or pressing the Conference
key.
• Cancel Conference (Menu and Dialog Keys)/Release This Call
(Menu and Dialog Keys)
Abandoning an attempt to add a call to a conference results in
the original party, now on hold, being retrieved.
Select the
Cancel Conference option from the menu system if dialing has
34
1275-00030
1275-00030
35
Advertisement
Table of Contents
