Controlling Relays - Siemens HiPath 5000 RSM Operating Instructions Manual

Special Functions in the LAN (PC Network)
Step by Step
50 50 50 50

Controlling Relays

If this feature is configured (contact the service person-
nel), you can also control relays Æ page 39 in other
HiPath 3000 communications platforms.
Lift the handset.
Enter the code.
Enter the (DISA) call number of the HiPath 3000 in
which the relay is to be controlled.
Enter
Enter the (DISA) call number of the telephone from
which you wish to control the relay.
Enter
or Enter the code for "on" or "off".
... Enter the relay.