Accepting A Call For Another Member Of Your Team; Activating And Deactivating A Ringing Group - Siemens HiPath 5000 RSM Operating Instructions Manual

Using Other Team Functions
Step by Step
44 44 44 44
or
Enter a group/trunk number to directly "leave or join".
If you deactivate the audible tone for another
group/trunk, or deactivate it for all groups and
trunks to which you belong, a special dial tone
sounds when you lift the handset.
Accepting a Call for Another Member
of Your Team
You can accept calls for other telephones in your team
from your telephone even while engaged in another
call. To do this, contact the service personnel to find out
if a pickup group has been configured.
Precondition: You telephone rings briefly.
Lift the handset.
Enter the code.
Activating and Deactivating a Ringing
Group
You can have calls for your telephone signaled audibly at
up to five other phones. The person who answers first
receives the call.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 RSM (system networking via PC
network) Æ page 49!
Saving telephones for the ringing group:
Lift the handset.
Enter the code.
Enter the internal station number.
Removing all telephones in call ringing group:
Lift the handset.
Enter the code.