Using Other Team Functions; Turning Group Call On And Off - Siemens HiPath 5000 RSM Operating Instructions Manual

Step by Step
or
or

Using Other Team Functions

Turning Group Call On and Off

If this function has been configured (contact the service
personnel), you belong to one or more groups of users
who can each be reached under a hunt group or group
call number.
Incoming calls are signaled on all group member
telephones in the order in which they are received
( hunt group) or simultaneously (= group call) until one
member of the group accepts the call.
You can also belong to a team (including executive/
secretary ones) to which multiple lines have been
assigned. Æ page 41.
Each member of the group remains available under his
or her own station number.
You can activate and deactivate the audible signal for a
hunt group, group call or individual trunks in a group (in-
cluding an executive/secretary team).
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 RSM (system networking via PC
network) Æ page 46!
You belong to a hunt group or a group call:
Lift the handset.
Enter the code for "leave" or "join".
You belong to multiple groups or to one group with
lines (including executive/secretary teams):
Lift the handset.
Enter the code for "leave" or "join".
Enter the code for "Leave all groups".
or
Enter the code for "Join all groups.
Using Other Team Functions
43 43 43 43