4.
Remove bolt (7), nut and washers.
5.
Remove seat support tube (2) from receptacle tube (1).
6. Remove concertina type shroud (3) including spring
(5) and plastic end pieces (4 and 6).
7. Fit plastic end pieces (4 and 6) to new spring.
8. Grease spring generously. The spring should be
covered completely.
9. Install concertina type shroud (3).
10. Install concertina type shroud (3) including spring (5)
and plastic end pieces (4 and 6).
11. Insert seat support tube (2) into receptacle tube (1)
and press down gently.
12. Reposition bolt (7), nut and washers.
1509707-E
13.
Firmly tighten seat support bolt.
14. Reposition seat.
4.11 Accessories
4.11.1 Accessories list
•
Mirror (right or left)
•
Connection tube (to mount oxygen tube, shopping
basket)
•
Safety vest
•
Warning triangle
•
OrionMETRO: solid tires (without rim),11 inch, black
•
OrionPRO: solid tires (without rim), 12 inch, black
•
Seat lifter kit, electrical, 12 cm
•
Seat suspensions
•
Front bumper
•
Rear bumper
•
Personal key
•
Crutch/cane holder (right or left)
•
Lockable storage box, front
•
Lockable storage box, rear, incl. clutch holder bracket
•
Rear basket
•
Backrest bag
•
Hour counter
•
Seat belt
•
Seat bag
•
Walking frame holder
•
Rollator holder incl. crutch holder
•
Windscreen
•
Oxygen bottle holder
•
Can holder
•
Off-board charger kit
•
Covers: Storage cover (Full scooter cover), Seat Cover
(Rain & Dirt protection)
The installation instructions for additional
accessories are available at your Invacare® provider
or directly from Invacare®.
Service
25